Allergy Reducing

Qty Per Unit: Package of 12 Register MERV 11 Air Vent Filters
Register Vent Filtration
Allergy Reducing Air Vent Filters MERV 11 has a permanent electrostatic charge to help trap dirt, dust, smoke & pollen sized particles through furnace/AC registers. Keeps dirt & objects from falling into ducts.  

Can be trimmed to fit standard size vents – 4″ X 12″ and under.

Why use AIR Vent Filters?
· Air Register Vent Filters are made of a self-charging electrostatic material that acts as a dust magnet for your vent register system.

· Use in bathrooms, bedrooms, kitchen, family room, and RV/Motor Homes.

· When air flows through the filter, dirt, dust, smoke, and pollen sized particles are trapped. The filtered air then passes back into your house.

· Keeps dirt and objects from falling into ducts.

· Air Vent Filters are designed to provide filtered air in your home.

Easy Installation

1. Remove register vent.
2. If needed, cut vent filter with household scissors using your register vent as a guide. Most vents will be 2 1/4″ X 12″ – 4″ X 10″ – 4″ X 6″ – 4″ X 12″.
3. Install in the bottom of the air register or in register opening.

To prevent airflow restriction and for maximum filtration inspect filter regularly and replace when dirty, approximately every 60- 90 days.

Note: Do not use in every vent in your home. This could cause airflow restriction and damage your furnace/AC unit. This product is not intended to replace your AC/Furnace filters. Air vent filters must be used in addition to your required Air Conditioner /Furnace filter for your HVAC unit.

Air vent filters will only increase your indoor air quality when used with your Nordic Pure HVAC air filters.

Helps trap dirt & objects when air passes thru furnace/AC registers

Permanently charged electrostatic materials trap harmful allergens MERV 13 media

Not intended to replace AC/furnace filters

Trim if needed

Designed to provide fresher, filtered air in your home or office